app_store_button

google_play_button

Details page - Device banner - 894x1036

Step into an infinite world of stories

Listen and read

Hackaday

Hackaday Editors take a look at all of the interesting uses of technology that pop up on the internet each week. Topics cover a wide range like bending consumer electronics to your will, designing circuit boards, building robots, writing software, 3D printing interesting objects, and using machine tools. Get your fix of geeky goodness from new episodes every Friday morning.

Hackaday Podcast

Our choice of hacks included a fond look at embedded systems and the classic fashion sense of Cornell's Bruce Land, risky open CRT surgery, a very strange but very cool way to make music, and the ultimate backyard astronomer's observatory. We talked about Stamp collecting for SMD prototyping, crushing aluminum with a boatload of current, a PC that heats your seat, and bringing HDMI to the Commodore 64.
 
We also took a look at flight tracking IRL, a Flipper-based POV, the ultimate internet toaster, and printing SVGs for fun and profit. Finally, we wrapped things up with a look at the tech behind real-time river flow tracking and a peek inside the surprisingly energetic world of fuel cells.
 
 Check out all the links over at Hackaday!

Ep 323: Impossible CRT Surgery, Fuel Cells, Stream Gages, and a Love Letter to Microcontrollers

We're firmly in Europe this week on the Hackaday podcast, as Elliot Williams and Jenny List are freshly returned from Berlin and Hackaday Europe. A few days of mingling with the Hackaday community, going through mild panic over badges and SAOs, and enjoying the unique atmosphere of that city.
 
After discussing the weekend's festivities we dive right into the hacks, touching on the coolest of thermal cameras, wildly inefficient but very entertaining wireless power transfer, and a restrospective on the capacitor plague from the early 2000s. Was it industrial espionage gone wrong, or something else? We also take a moment to consider spring PCB cnnectors, as used by both one of the Hackaday Europe SAOs, and a rather neat PCB resistance decade box, before looking at a tryly astounding PCB blinky that sets a new miniaturisation standard.
 
In our quick roundup the standouts are a 1970s British kit synthesiser and an emulated 6502 system written in shell script, and in the can't-miss section we look at a new contender fro the smallest microcontroller, and the posibility that a century of waste coal ash may conceal a fortune in rare earth elements.
 
Follow the links over at Hackaday.

Ep 313: Capacitor Plague, Wireless Power, and Tiny Everything

Hackaday Editors Elliot Williams and Tom Nardi definitely didn't plan on devoting most of this episode to 3D printing and space stories, but let's be honest, it was bound to happen sooner or later. After an update on the Hackaday Prize, the discussion moves on to a pair of troubled spacecraft and the challenges of exploring the final frontier.
 
From there you'll hear about a chocolate 3D printer we've had our eyes on for years, the tools you should have next to your own (non-chocolate) 3D printer, and a bit of contemplation of what it really means to design for 3D printing versus traditional manufacturing methods. But it's not all plastic fantastic -- by the end of the episode you'll also hear about some particularly bold high-altitude aviators and the surprisingly short time we have left with the humble barcode.
 
 Check out the show notes to follow along with the links!

Ep 217: The Unintentional Space and 3D Printing Episode

This week, Hackaday's Elliot Williams and Kristina Panos met up across the universe to bring you the latest news, mystery sound, and of course, a big bunch of hacks from the previous seven days or so.
 
 In Hackaday news, OMG Supercon is almost here! And we just revealed the badge! In other news, we've still got a contest running. Read all about the 2025 Component Abuse Challenge, sponsored by DigiKey, and check out the contest page for all the details.
 
On What's That Sound, Kristina failed spectacularly. Will you fare better and perhaps win a Hackaday Podcast t-shirt? Mayhap you will.
 
After that, it's on to the hacks and such, beginning with a really cool entry into the Component Abuse Challenge wherein a simple transmission line is used to multiply a voltage. We watch as a POV globe takes to the skies, once it has enough motors.
 
Then we discuss several awesome hacks such as an incredible desk that simulates beehive activity, a really great handheld PC build, and a Tinkercad twofer. Finally, we discuss the future of removable batteries, and the history of movable type.
 
 Check out the links over at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Episode 343: Double Component Abuse, a Tinkercad Twofer, and a Pair of Rants

It was Elliot and Dan on the podcast today, taking a look at the best the week had to offer in terms of your hacks. We started with surprising news about the rapidly approaching Supercon keynote; no spoilers, but Star Trek fans such as we who don't have tickets will be greatly disappointed.
 
Elliot waxed on about taking the poop out of your prints, Dan got into a camera that adds a dimension to its images, and we both delighted in the inner workings of an air-powered squishy robot.
 
Questions? We've got plenty. Is it possible to take an X-ray without an X-ray tube? Or X-rays, for that matter? Did Lucille Ball crack a spy ring with her fillings? Is Algol set to take over the world? What's inside a germanium transistor? How does a flipping fish say Happy Birthday? And how far down the Meshtastic rabbit hole did our own Tom Nardi fall? Tune in to find out the answers.

Ep 342: Poopless Prints, Radio in Your Fillings, and One Hyperspectral Pixel at a Time

The nights are drawing in for Europeans, and Elliot Williams is joined this week by Jenny List for an evening podcast looking at the past week in all things Hackaday. After reminding listeners of the upcoming Hackaday Supercon and Jawncon events, we take a moment to mark the sad passing of the prolific YouTuber, Robert Murray-Smith.
 
Before diving into the real hacks, there are a couple of more general news stories with an effect on our community. First, the takeover of Arduino by Qualcomm, and what its effect is likely to be. We try to speculate as to where the Arduino platform might go from here, and even whether it remains the player it once was, in 2025. Then there's the decision by Google to restrict Android sideloading to only approved-developer APKs unless over ADB. It's an assault on a user's rights over their own hardware, as well as something of a blow to the open-source Android ecosystem. What will be our community's response?
 
On more familiar territory we have custom LCDs, algorithmic art, and a discussion of non-stepper motors in 3D printing. Even the MakerBot Cupcake makes an appearance. Then there's a tiny RV, new creative use of an ESP32 peripheral, and the DVD logo screensaver, in hardware. We end the show with a look at why logic circuits use the voltages they do. It's a smorgasbord of hacks for your listening enjoyment.

Ep 341: Qualcomm Owns Arduino, Steppers Still Dominate 3D Printing, and Google Controls Your Apps

Elliot Williams and Al Williams got together to share their favorite hacks of the week with you. If you listen in, you'll hear exciting news about the upcoming SuperCon and the rare occurrence of Al winning the What's That Sound game.
 
For hacks, the guys talk about the IEEE's take on the "best" programming languages of 2025 and how they think AI is going to fundamentally transform the job of a programmer. On a lighter note, there's an industrial robot who retired to bartending, a minimal drum machine, a high-powered laser, and a Fortran flight simulator reborn with Unity 3D.
 
In the "can't miss" category, you'll learn how not to switch Linux distributions and what to expect when you need surgery while on your next mission to outer space.
 
There's lots more. Want to follow along? Check out the links below. As always, tell us what you think about this episode in the comments!

Ep 340: The Best Programming Language, Space Surgery, and Hacking Two 3D Printers into One

Hackaday Editors Elliot Williams and Tom Nardi start this week's episode off with an update on the rapidly approaching 2025 Supercon in Pasadena, California. From there they'll talk about the surprisingly high-tech world of vapes, a flying DeLorean several years in the making, non-contact pulse monitoring, and the potential of backyard radio telescopes to do real astronomy. You'll hear about a dodecahedron speaker, a page turning peripheral, and 3D printed tools for unfolding boxes. They'll wrap things up by taking a look at the latest generation of wearable smart glasses, and wonder if putting a bank of batteries in your home is really with the hassle.
 
Check out the links over at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Ep 339: The Vape Episode, a Flying DeLorean, and DIY Science

This week, Hackaday's Elliot Williams and Kristina Panos met up over the tubes to bring you the latest news, mystery sound, and of course, a big bunch of hacks from the previous seven days or so.
 
In Hackaday news, we've got a new contest running! Read all about the 2025 Component Abuse Challenge, sponsored by DigiKey, and check out the contest page for all the details. In sad news, American Science & Surplus are shuttering online sales, leaving just the brick and mortar stores in Wisconsin and Illinois.
 
On What's That Sound, it's a results show, which means Kristina gets to take a stab at it. She missed the mark, but that's okay, because [Montana Mike] knew that it was the theme music for the show Beakman's World, which was described by one contestant as "Bill Nye on crack".
 
After that, it's on to the hacks and such, beginning with a really cool way to smooth your 3D prints in situ. JWe take a much closer look at that talking robot's typewriter-inspired mouth from about a month ago. Then we discuss several awesome technological feats such as running code on a PAX credit card payment machine, using the alphabet as joinery, and the invention of UTF-8 in general. Finally, we discuss the detection of spicy shrimp, and marvel at the history of email.
 
Check out the links over on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Ep 338: Smoothing 3D Prints, Reading CNC Joints, and Detecting Spicy Shrimp

Elliot Williams and Al Williams got together again to discuss the best of Hackaday for a week, and you're invited. This week, the guys were into the Raspberry Pi 5, CNC soldering, signal processing, and plasma cutting. There are dangerous power supplies and a custom 11-bit CPU.
 
Of course, there are a few Halloween projects that would fit in perfectly with the upcoming Halloween contest (the deadline is the end of this month; you still have time).
 
OpenSCAD is about to get a lot faster, and a $20 oscilloscope might not be a toy after all. They wrap up by talking about Tom Nardi's latest hardware conversion of DIP parts to SMD and how TVs were made behind the Iron Curtain.
 
Did you miss a story? Check out the links and/or tell us what you think about this episode in the comments!

Ep 239: Overclocking, Oscilloscopes, and Oh No! SMD Out of Stock!

Listen and read

Other podcasts you might like ...